When summer comes, the problem of high temperature of air compressor can be solved by the following measures:

1.Keep the air compressor room well ventilated: Make sure the air compressor room has a good ventilation system. You can install exhaust fans in the room to exhaust the hot air and lower the ambient temperature.

2.Clean the cooling system regularly: clean the dust and dirt on the surface of the cooler to ensure the cooler works properly and prevent blockage that may lead to a reduction in cooling water or a decrease in cooling efficiency.

3.Check the use of lubricating oil: In summer, the temperature is high and the viscosity of lubricating oil may change. Check the oil level regularly and replace the appropriate lubricating oil in time.

4.Pay attention to the operating environment of the air compressor: Keep the environment around the air compressor clean and tidy, ensure that the air inlet and outlet are unobstructed, and avoid the accumulation of debris and flammable and explosive items.

5.Regular maintenance: Summer is the peak season for air compressor failures. Regular maintenance can prevent failures, especially for old equipment, which requires careful inspection.

6.Install an alarm system: Install a temperature alarm system to monitor the operating temperature of the air compressor in real time. Once the temperature exceeds the set value, the system will automatically sound an alarm.

7.Adjust the workload: In summer when the temperature is high, reasonably arrange the working time and load of the air compressor to avoid long-term continuous operation and reduce the exhaust pressure and flow rate.

8.Strengthen staff training: let operators understand the working principle and maintenance knowledge of air compressors, and master the handling methods of common faults.

9.Check the oil stop valve and oil filter: Make sure the oil stop valve is working properly to avoid rapid temperature rise due to lack of oil; Check whether the oil filter is clogged, affecting the oil flow.

10.Check the thermal control valve: Make sure the thermal control valve is working properly and the lubricating oil can be cooled by the cooler to avoid overheating caused by the oil temperature not being able to drop.

11.Check the oil regulator and oil quality: increase the oil injection volume appropriately to ensure that the lubricating oil used has not deteriorated and maintain good heat exchange performance.

12.Check the oil cooler and cooling water inlet temperature: Make sure the oil cooler is working properly, the cooling water temperature, water pressure and flow are normal, and the ambient temperature is appropriate.

By taking these measures, the problem of excessive air compressor temperature in summer can be effectively solved and the stable operation of the air compressor can be guaranteed.