The reasons why screw air compressors need to be equipped with gas storage tanks mainly include the following: 1.Balanced air pressure: The gas storage tank can balance the pressure fluctuation caused by the instantaneous increase in gas consumption of the gas-using equipment, ensuring the stability of the air pressure. 2.Reduce the number of air compressor starts and stops: By storing compressed ...

The crankshaft is an important moving part in the air compressor. Its function is to transfer the energy of the motor to the connecting rod and the piston, and convert the rotational motion into the reciprocating motion of the piston. When designing the crankshaft, it is necessary to consider the periodic load and friction and wear it bears, so there are high requirements for fatigue strength and ...

The crosshead is an important transmission component in the air compressor. Its main function is to connect the piston rod and the connecting rod, bear the lateral force, and play a guiding role. It converts the rotational motion of the crankshaft into the reciprocating linear motion of the piston through the connecting rod. The crosshead needs to have sufficient strength, rigidity, wear resistanc...

The air compressor connecting rod is a key component that bears the piston thrust and transmits it to the crankshaft. Its repair is extremely important. The following measures can be taken to repair the air compressor connecting rod: 1.Check whether the connecting rod bearing, connecting rod bushing, main bearing bearing are worn, pulled or burned, and whether the connecting rod bolts are loose. I...

The reasons for air compressor classification mainly include the following points: 1.Save power consumption: Multi-stage compression uses an intercooler to cool the compressed gas after the first stage of compression, and then enter the next stage after the temperature is reduced, thereby increasing the density and facilitating further compression. This can greatly save power consumption. The more...

The temperature control valve of the screw air compressor is a key component of temperature control. Its function is to control the injection temperature, thereby ensuring that the exhaust temperature is maintained within a suitable range. The following is an introduction to the temperature control valve of the screw air compressor: 1.Exhaust temperature limit: The exhaust temperature of the screw...

To ensure that the air compressor remains efficient and operates for a long time, you can follow the following maintenance and care measures: 1.Regular maintenance: Develop a detailed maintenance plan, assign personnel to perform regular inspections and maintenance to keep the air compressor clean, oil-free, and dirt-free. 2.Replace consumables: Regularly replace compressor cooling lubricating oil...

The working process of a single screw air compressor includes four key steps: suction, compression, exhaust and cooling. The specific information is as follows: 1.Suction process: When the screw rotates, air enters the machine through the air inlet, forming a sealed air bag, and the spiral shape of the screw pushes the air to the other side of the machine. 2.Compression process: The screw continue...