Air compressor duct layout is a very technical job, and there are many factors to consider, here are some basic principles and recommendations: 1.Pipeline material selection: high-quality steel should be selected in line with national standards, with good pressure resistance and corrosion resistance, and can withstand the high pressure and high temperature of compressed air. The welding should be ...

The application of air compressor in the hot-dip galvanizing industry is mainly reflected in the following aspects: 1.The Power Source for Pneumatic Equipment: Air compressors provide the necessary power for pneumatic equipment on the hot-dip galvanizing line, such as cylinders and pneumatic valves, ensuring the normal operation of the equipment. 2.Surface Treatment: During the hot-dip galvanizing...

Air compressors are widely used in rail transit, mainly in the following aspects: 1.Braking system: The air compressor is the power source of the train braking system, and the braking operation is realized by compressed air. Air is compressed and stored during braking and released when needed, ensuring rapid response and effectiveness of braking. 2.Suspension system: The air compressor is used in ...

When choosing an air compressor, air cooling and water cooling are two common cooling methods, each of which has different characteristics and application scenarios: 1.Cooling Method: The water-cooled air compressor utilizes the fluidity and temperature difference of cooling water to maintain equipment temperature. It is suitable for continuous operation and high-efficiency applications due to the...

The choice of installation location of the air compressor is very important, which is directly related to the operation efficiency, maintenance cost and service life of the air compressor. Here are some of the requirements for the air compressor installation location: 1.Site selection: Choose a cool, clean, and well-ventilated place with an ambient temperature between 0-40°C。 At the same time, the...

The emulsification of compressor oil can have a series of adverse effects on equipment, specifically including: 1.Reduced lubrication effect: After the lubricating oil is emulsified, its lubricating performance is greatly reduced, which cannot effectively protect the internal parts of the air compressor, increasing mechanical wear and friction. 2.Decreased Oxidative Stability: Emulsified lubricant...

The emulsification of compressor oil is a common issue, which can be caused by the following reasons: 1.Humidity in the air: If the air compressor runs in an environment with high air humidity for a long time, the moisture and oil mix, which can easily lead to emulsification. 2.Cooling System Failure: The cooling system is used to cool the compressor and the lubricant. If the cooling system fails ...

The possible reasons for a compressor tripping could include but are not limited to the following points: 1.Power Issues: Power supply problems such as voltage instability, under-voltage, and over-voltage can cause the protective devices of the air compressor to actuate, leading to equipment tripping. 2.Motor Failure: Motor failures such as short circuits in the motor coil, burned windings, and da...