The maintenance of centrifugal air compressors is the key to ensuring long-term stable operation and extending the service life of the equipment. The following are some basic maintenance steps: 1.Impeller maintenance: The impeller is one of the core components of the centrifugal air compressor. It needs to be regularly checked for wear, cleaned and balanced. 2.Cooling system maintenance: Ensure th...
Read MoreThe adjustment and maintenance of the air compressor safety valve is an important part of ensuring the safe operation of the equipment. The following are some basic adjustment methods and precautions: 1.Preparation before adjusting the safety valve: Before adjusting the safety valve, make sure the air compressor is in the shutdown state, check the exhaust system, pipelines and pressure gauge for b...
Read MoreTo ensure the long-term and efficient operation of the air compressor, regular maintenance and servicing are required. The following are some basic maintenance steps and related source information: 1.Replace the air filter regularly: The internal clearance of the screw air compressor only allows particles within 15u to be filtered out. Regular replacement can prevent particles larger than 15u from...
Read MoreThe main reasons why air compressors are used in the aquaculture industry include: 1.Oxygenation: The air compressor is used to drive the bubble oxygenation system, injecting bubbles into the water to increase the dissolved oxygen content in the water, improve the oxygen conditions in the water, and promote the growth and development of aquaculture species. 2.Mixing and stirring: The air compresso...
Read MoreBefore the frequency converter technology became popular, air compressor speed regulation mainly relied on the following methods: 1.Pole-changing speed regulation: Speed regulation is achieved by changing the number of pole pairs of the motor. Although this method has a limited speed regulation range, it can achieve greater torque and stable operation. For example, the speed of a four-pole motor i...
Read MoreThe troubleshooting of motors in common compressors involves many aspects. Here are some troubleshooting methods: 1.Winding break inspection: Use a megohmmeter, multimeter or check lamp in series to check the end point and neutral line of the running winding. If the meter is not conducting or the lamp is not bright, it indicates that the winding is broken. 2.Winding short circuit check: Use a mego...
Read MoreThe energy-saving transformation of air compressor is due to the following reasons: 1. High energy consumption: Only 10% of the electric energy consumed by air compressors in industrial production is converted into compressed air, and the remaining 90% is converted into heat energy. This means that the cost of compressed air is much higher than the electricity bill, so energy-saving renovatio...
Read MoreThe air compressor waste heat recovery system is an efficient and energy-saving technology that can make full use of the large amount of waste heat generated during the operation of the air compressor. The following are several key points of the air compressor waste heat recovery system: 1.Energy-saving principle: The air compressor consumes electricity and generates heat during operation, most of...
Read More